C-30ZX使臭氧檢測和系統控制變得簡單和經濟。儀器不是原始標準，而是出售用來作一般監控，更不是用來作精確測量。在某些中等溫度和濕度條件下，C-3ZX可以用于室外監測。

C-30ZX使臭氧檢測和系統控制變得簡單和經濟。儀器不是原始標準，而是出售用來作一般監控，更不是用來作精確測量。在某些中等溫度和濕度條件下，C-3ZX可以用于室外監測。

響應是線性的，比例是1V＝0.1ppm。

C-30ZXzui精確的區間在0.05-0.14ppm之間，精度應該在10-20％。低于0.05ppm時，精度可能受電子和化學物質干擾。0.03ppm是通常使用的zui低讀數。

傳感器：加熱金屬氧化半導體

臭氧靈敏度：

0-0.14ppm LED 顯示

0-0.30ppm通過外部電壓測量

檢測下限：0.02ppm

精度：10-20%取決于條件

響應時間：數十秒，恢復時間略長

建議常規功能檢查：每三個月；建議校準檢查：每年

溫度范圍：至少10－27℃

尺寸：85×35×60mm

重量：140g

電源要求：12VDC@300ma

保險絲：自行復位@250ma電流或輸入電壓大約超過24V。儀器具有電壓過高保護電極消除電壓峰值和不穩定

外殼材料：ABS阻燃材料

安裝：磁鐵吸引或掛鉤
For water treatment plants, pulp bleaching mills, ozone generator monitors, photocopier and laser printer centers, fumigation projects, HVAC and indoor air quality systems, vehicular pollution monitors, research labs and pilot plants, and wherever ozone exposure is possible: the C-30ZX has a very fast and continuous response. It is rugged and versatile. There are no touchy controls.

Benefits:

• Constantly monitors your work environment; shows the ozone concentration by a multicolor graphical display, and alarms when there is a health hazard
• No installation typically required; easily understood by non-technical personnel
• Virtually no maintenance

Features:

• LED readout changes color as ozone level increases
• Audio alarm and output for data logger
• Connections for external equipment control
• For general monitoring and ozone control
• Many accessories available such as data loggers, calibrators, and protective enclosures with heaters and 4-20 mA outputs

Specifications:

• Range: .02-.14ppm of ozone (LED scale); .02-.30 ppm via external data readout
• Bargraph Display: Normally green; yellow at .05 ppm (caution); red at .1 ppm (danger)
• Response time: Within tenths of seconds of ozone reaching the sensor
• Measurement principle: HMOS (heated metal oxide semiconductor) sensor
• Size: 85 × 35 × 60 mm (3.25 × 1.375 × 2.375 in)
• Weight: 140 gr (5 oz)
• Power requirements: 12 VDC at 300 mA. AC adapters available worldwide.
• Outputs: LED bargraph, audio alarm, 0-3 V analog output such as for data loggers, and external alarm relay contacts; alarm actuation and relay contact closure at .1 ppm (standard) and is programmable.