產品簡介Brief：
JB-5C/6C輪廓粗糙度測試儀是二合為一的精密測量?jī)x器，廣泛應用于機械加工、汽車、軸承、機床、摸具、精密五金、光學加工等行業。儀器驅動箱提供了行程為100、120、150毫米不同規格的高精度直線基準導軌，傳感器沿導軌作直線運動，位移量采用精密光柵位移傳感器進行數據采集。從而建立X坐標測量單位，在Z軸方向采用從10 mm至20mm兩種規格差動式電感傳感器

成都JB-5C/6C輪廓粗糙度測試儀可測量各種精密機械零件的粗糙度和輪廓形狀參數。用擬合法可評定半徑、角度處理，圓處理，點線處理，兩圓中心距角度、距離等。從而可測量直線度、凸度、溝心距、傾斜度、槽深，槽寬，溝邊距，溝心距垂直距離、水平距離、臺階等形狀參數。
此款儀器已可同國外進口儀器性能相比，各方面指標已達到標準，儀器符合國家標準GB/T3505-2000, GB/T6062-2001, GB/T10610-1998, 以及標準ISO5436, ISO11562,ISO4287的要求。詳細指標見技術參數。
It is widely used in metrological departments of industries of autos, tools, bearings, Patterns, and optics for measuring profile and roughness of precision parts. The drive box is equipped with a straight-line guide of high accuracy traveling up to 100 mm. The displacement of the transducer moving along the guide collected with a precision grating system. The transducer is operated with either keys on the control box or the buttons on the window interface. The JB-5C software runs on Windows XP.
It is used to measure the form and roughness of profiles of precision parts. In addition to roughness, by fitting least-square line of nominal form, a variety of form parameters can be measured, such as radius, angle, straightness, convexity, vertical and horizontal distance, and distances between points, circles, and slots.

成都JB-5C/6C輪廓粗糙度測試儀技術規格 MAIN SPECIFICATIONS