主要特性與技術指標

• Frequency range of 10 MHz to 18 GHz
• USB connectivity with wide dynamic range of -70 to +26 dBm for small signal measurements
• Fast real time measurement of 50,000 readings/sec
• Real-time measurement with zero dead time to ensure every single continuous pulse is measured
• Average mode time-selectivity function allows full dynamic range for average and time selectivity average power measurements
• Internal zero and automatic calibration saves time and reduces measurement uncertainty
• A BenchVue software license (BV0007B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences

描述

Accurately measure any modulated signal with the Keysight Technologies, Inc. U/L2050/60 X-Series wide dynamic range power sensors. The USB/LAN connectivity models come with wide dynamic range, covering -70 to +26 dBm. This sensor offers very accurate and repeatable power measurements for any modulated signal and comes with super-fast measurement speed of 50,000 readings/sec, which enables higher manufacturing throughput. Users can also save time and reduce measurement uncertainty with the internal zero and calibration function. The U/L2050/60 X-Series is supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming. Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform average power measurement and analysis.

Learn more about Keysight LAN and USB Power Sensors

Keysight USB 與局域網功率傳感器提供了功率計的峰值功率和平均功率測量功能，且外形緊湊，便于攜帶。

通過即插即用的 USB 連通性，您可以快速和輕松地對功率傳感器進行設置。只需將傳感器連接到 PC 上，便可使用軟件套件立即執行功率測量。Keysight USB 功率傳感器可以讓您夢想成真——簡單的設置，發揮遠超傳感器的功能。

您是否正在尋找一款具有局域網連通性的功率傳感器，想用它實現衛星系統的遠程監測？您可以選擇 L20X0XA 局域網功率傳感器。它是一款基于局域網/以太網供電（PoE）的傳感器，配有熱真空選件，且擁有超寬的動態范圍。

您想要尋找一款 USB 功率傳感器來插入到 PC 中嗎？請選擇 U20X0XA USB 功率傳感器，它擁有實時測量功能和零靜寂時間，內置固化軟件存儲器高達 1MB。

U/L2050/60 X 系列 USB/LAN 寬動態范圍峰值和平均功率傳感器

• 擁有 -70 至 +26 dBm 的寬動態范圍，靜寂時間為零，可以測量連續脈沖（低至 100us PRI 或 10 kHz PRF）

U2040 X 系列寬動態范圍功率傳感器

• 超快的測量速度（50,000 個讀數/秒）

U2020 X 系列 USB 峰值功率和平均功率傳感器

• 寬廣的峰值功率動態范圍，并且在緩沖模式下?lián)碛泻芨叩臏y量速度

U8480 系列 USB 熱電偶功率傳感器

• 擁有同類產品中較為出色的功率線性度和實時測量不確定度（MU）

U2000 系列 USB 平均功率傳感器

• 可測量所有類型信號（不限制帶寬）的平均功率

界面直觀的功率測量軟件

了解與 USB 功率傳感器配合使用的 N1918A 功率分析管理軟件的更多信息。N1918A 功率分析管理軟件。

Keysight BenchVue 軟件（2.5 和更高版本）可與 Keysight U2020 X 系列 USB 峰值功率和平均功率傳感器搭配使用。BV0000A BenchVue 平臺軟件。